-
Kyoritsu Chemical 5341L Cover Lens Seal Shadow area UVPSA or UV+Heat Curing for For Fingerprint Sensor and Camera Module (Mobile, Automotive, CCTV)
・Optical fingerprint is similar structure to camera module
・Shadow area UVPSA or UV+Heat Curing <<Display/Lens>>
・High reliability
・High accuracy position
For Camera Module (Mobile, Automotive, CCTV)
-
LO-TECH 7102 Epoxy resin GLUE
To be potted products need to keep dry, clean; use check the A agent, observe whether there is settlement, and A agent to stir evenly; according to the ratio of the amount, and weighing accurate, please remember that the ratio is the weight ratio Non-volume ratio, A, B mixture after the need to fully stir evenly to avoid curing is not complete; stir even after the timely filling, and as far as possible in the use of time to use fully mixed glue; Gradually penetrate into the product gap, if necessary, please carry out the second filling; curing process, please keep the environment clean, so that impurities or dust into the uncured glue surface.
-
Loca liquid optical glue for uv glue on mobile phone screen
Liquid Optic Adhesive (LOCA) Typical Applications:
1. In a design with a curved surface and a complex surface;
2. has a high ink thickness or uneven surface;
3. Glass structure capacitive screen G-G;
4.Lens compound and LCD with Lens fit;
5. Mobile touch screen protection. -
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE 620 Cylindrical adhesive High strength anaerobic adhesive high temperature resistant adhesive for bearing gear
The LOCTITE620 is mainly suitable for bonding cylindrical assembly parts. The product cures in isolation from air between two closely fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical uses include filling tight fitting press fitting, gaps between key grooves and splines; Assembly bearing and bushing, and make the press fit bond holding strength higher. It is especially suitable for the condition that the temperature must reach 200°C.
-
LOCTITE 104 two-component epoxy AB Structural glue thermosetting liquid adhesive
- Product parameters
Typical use: For bonding metals, glass, ceramics and thermosetting plastics in applications requiring extremely high temperature exposure.
Brand name: LOCTITE Ablestik 104
Component: two components
Product Overview:
Henkel Loctite Ablestik 104 is a two-component thermosetting liquid epoxy adhesive for the assembly of thermosetting plastics, metals, ceramics and glass. It has a long service life, high shear strength, non-conductivity, excellent high temperature and chemical resistance
- Product parameters
-
LOCTITE 201 High temperature resistant thread lock Anaerobic adhesive dry skin film precoating
Matters needing attention
This product is not suitable for use in pure oxygen and/or oxygen-rich environment, and can not be used as a sealing material for chlorine gas or other strong oxidizing substances
Use.
Before using a water-based cleaning solution to clean the bonded surface, it is important to check the cleaning solution and the adhesive
Incompatible. In some cases, these cleaning solutions can affect the curing and properties of the glue solution. -
LOCTITE 207 Transparent universal silicone high temperature resistant thixotropic plane sealing glue
Brand name: Henkel LOCTITE
Product type: general silicone plane sealing silica gel
Product model: Loctite SI207
Product specification: 300ml
Product color: transparent
Operating temperature: -54℃ to +204 ℃
Extrusion rate: 25~40g/min
Material: suitable for polycarbonate, general plastics, mirrors, non-ferrous metals, concrete and ceramic materials
Application scenario: It is suitable for stamping and sealing of power machinery, automobile, engineering machinery, internal combustion engine, mining machinery and electrical equipment -
LOCTITE 222 for the locking and sealing of threaded fasteners
For Assembly
1. For best results, clean all surfaces (external and internal)
with a LOCTITE®
cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too
slow, spray all threads with Activator SF 7471™ or SF
7649™ and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not
allow the tip to touch metal surfaces during application.
5. For Thru Holes, apply several drops of the product onto
the bolt at the nut engagement area.
6. For Blind Holes, apply several drops of the product down
the internal threads to the bottom of the hole.
7. Assemble and tighten as required.
8. For Sealing Applications, apply a 360° bead of product
to the leading threads of the male fitting, leaving the first
thread free. Force the material into the threads to
thoroughly fill the voids. For bigger threads and voids,
adjust product amount accordingly and apply a 360° bead
of product on the female threads also. -
LOCTITE 232 Motor rotor glue Motor magnetic steel bonding adhesive cylinder holding anaerobic adhesive
LOCTITE 232 Methyl methacrylate acrylate fixation compound. Its lubricating properties can facilitate the assembly of high interference or high torque materials. LOCTITE® 232 Brown, opaque acrylic methacrylate is an acrylic acid compliant curable. Its lubricating properties can facilitate the assembly of high interference or high torque materials. It prevents damage during disassembly and eliminates corrosion at the interface due to higher disassembly forces. The typical application of this product is high torque thread assembly and heavy fit.
-
LOCTITE 2400 Screw glue Thread locking agent Acrylate anaerobic adhesive
Brand: LOCTITE
Model: 2400
Appearance: Red
Specification: 50 mi
Type: Acrylic
Curing speed: full setting 24 hours
Application: Mainly used in fastening screws, automobile industry, electronic appliances and so on