-
LOCTITE SF770 Instant Dry Adhesive Accelerator promotes curing and enhances surface adhesion activator base coating
-
LOCTITE SI 5031 UV Light Curing Sealant UV curable silicone medium strength glue
Form a flexible rubber seal of medium strength
fluoresceable
Dual cure – UV or visible light or moisture -
Loctite SI 5091 general purpose sealant UV adhesive UV light curing adhesive
LOCTITE5091 UV light curing adhesive universal high viscosity. LOCTITE5091 UV curing adhesive Features: high viscosity, strong flexibility, impact and shock resistance, a wide range of bonding materials, can be used UV or activator, or both, in the use of UV, curing in seconds.
-
LOCTITE SI 595 single component, room temperature vulcanizing compound designed to provide an excellent adhesive sealant for mechanical assemblies
TYPICAL CURING PERFORMANCE
LOCTITE SI 595 cures on exposure to moisture in the air.
The product dries tack free in 45 minutes and fully cures in 24
hours. Cure times will vary with temperature, humidity and
gap. -
LOCTITE SI587 Flat sealant Seal silicone rubber thixoxime silicone paste engine sealant
LOCTITE SI 587 is a metallic blue, thixotropic silicone paste for plant maintenance and flat seal and sealing applications for Oems of all sizes. As a field formed gasket/sealant, it is designed to provide superior performance in typical automotive flat seal applications. The product is typically used in applications where the maximum temperature is +500 °F(+260 °C).
-
LOCTITE STYCAST US 5544 fast gelling, flexible, flame retardant, mineral-filled, polyurethane compound.
Not for product specifications
The technical data contained herein are intended as reference only.
Please contact your local quality department for assistance and
recommendations on specifications for this product -
LOCTITE® 246 Blue, opaque, thixotropic dimethacrylate acrylic thread locking agent
Suitable for locking and sealing threaded fasteners that require normal removal with standard hand tools
Resistant to large shock, vibration and stress levels
Thixotropy can reduce the migration of liquid products after sizing
High temperature resistant -
LOCTITE268 thread solid adhesive rod high strength screw adhesive acrylate anaerobic adhesive
Brand :LOCTITE/ LOCTITE
Model: 268
Color: Red
Origin: China
Shelf life :24 months
Curing method: anaerobic curing
Features: No dripping, high strength
Application: Metal thread lock seal -
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
Loctite554 pipe thread sealant
Loctite554 anaerobic type pipe thread sealant, henkel loctite 554 glue product for less than 5.0 cm in diameter threaded fittings and pipeline provides maximum resistance to solvent protection. Recommended products applied to the presence of reinforcement learning material of refrigeration system and the maintenance of refrigeration. Sealant can replace the hardening compounds, lead oxide, glycerol and sealing tape. This product is not suitable for sliding fit pipe joint. The application of the product is usually working temperature is 870 ℃. Typical applications consist of metal and glass factories, chemical processing, paper processing, waste disposal facilities and textile industry.
-
Loctite609 cylindrical solid glue
LOCTITE609_ loctite 609 cylindrical rubber are _ [low viscosity/high strength]
LOCTITE henkel LOCTITE 609 glue, LOCTITE 609 cylindrical solid glue, low viscosity, high strength, suitable for filter, interference fit, hold the key to shaft, bearings, small motor rotor shaft and bushing, cooperate with the strength increase temperature, repair the wear of a shaft with a hole or ultra poor parts. The ideal radial fill the gap of 0.13 mm below, after 24 hours can provide 21 mpa shear strength, can easily switch different parts of the metal materials, can withstand the temperature to 149 degrees.
Typical use: high intensity -
LOCTmtedITE 518 single component, iu anam strengh,es weroant wurhen bic shich cealconfined in the absence of air between close fitting metal surfaces.
LOCTITE 518 provides robust curing
performance. It not only works on active metals (e.g. mild steel)
but also on passive substrates such as aluminum with a low
copper content. The product offers gap performance to 0.25
mm (0.01 in) and contamination tolerance. It cures in the
presence of minor surface contaminations from various oils,
such as cutting, lubrication, anti-corrosion and protection fluids
and cleaners containing surfactants and corrosion inhibitors.