-
TDbond 2835 engine oil
Packaging & Delivery- Packaging Details:
- 1kg lubricant oil
- Delivery Detail:
- 7-15days
-
The CEMEDINE 5100F quick-drying spray type is used for assembling and laminating building materials
use
1. For assembling and laminating building materials and furniture.
2. Used to install insulation materials and interior materials.
-
The genuine Simon Sze 366E joint sealer, a high performance adhesive for the Glue Industry
Application: It is used to fill the gap between the front and rear windshield and the edge of the car body. The gap between glass and rubber and between rubber and steel plate can be filled. Also suitable for dry wood, canvas, leather, cardboard, blankets, washing machines, cold and soft air-conditioning and other industrial equipment products and door frame edge buffer rubber adhesive, suitable for the adhesion of dry interior decoration materials synthetic rubber adhesive. [ notes ]366E contains hazardous ingredients toluene and N-hexane, 366FE contains hazardous ingredients toluene.
1. Highly flammable liquids and Vapors
2. Harmful if swallowed
3. Causes mild skin irritation, severe eye irritation long-term or repeated exposure may cause injury to organs if ingested and harmful to the respiratory tract harmful to aquatic organisms keep away from ignition sources, no Smoking 2. Keep container in well ventilated place 3. Close Container 4. Wear appropriate protective clothing, gloves, eye/face protectors 5. If contact with eyes, wash immediately with a large amount of water and seek medical attention. Do not induce vomiting. 8. Avoid release into the environment, according to the use of materials, different environment and measured data error code.
-
The metal surface is not sensitive instant dry glue
The surface is not sensitive
Universal type, medium viscosity. Used for bonding porous, acid and absorptive materials.
Main adhesive backing material: leather metal expect rubber wood paper, etc.
Color: colorless to straw color
Type: ethylGet free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
-
The original 3M 2290 high peel low viscosity epoxy adhesive is used for bonding metal and metal coatings
Product features
1. It has extremely high shear and peel strength
2. Formulation of solvent-based low viscosity coating
3. Dry into non-adhesive film, allowing the bonding to proceed to B order and multi-order process after 3 months
4. Wetting is good during curing and only a single surface needs to be coated
5. Hot pressing is recommended for laminating purposes during curing
-
The plastic screws into the loctite 425 glue
Directions for use:
1. For best performance bond surfaces should be clean and
free from grease.
2. This product performs best in thin bond gaps (0.05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup
solvents, nitromethane or acetone.
Loctite Material SpecificationLMS
LMS dated September-01, 1995. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality. -
Thermal Conductive grease ShinEtsu KS-609 / KS609
KS609 is a thermal conductive grease. It has excellent thermal properties (thermal conductivity 0.75WM / K),
General using for electronic devices.
The product is excellent insulation properties, volatile small and easy to use. Excellent Heat – resistant and cold – resistant .
Wide temperature range, no cure with low temperature -50 ℃ . -
Thread sealant 2432 Medium strength thread locking agent is suitable for stainless steel without surface activator
Loctite Loctite 2432 is a medium strength thread locking agent. This adhesive has very low halogen and sulfur content and is specifically designed for metals that are sensitive to these contaminants used in the nuclear industry, such as titanium. You can use hand tools to separate parts.
Disassembly of products used to brake and seal threaded joints can be easily accomplished using traditional hand tools.
It is especially suitable for stainless steels that do not use surface activators.
Polymerization occurs when the product is confined between metal surfaces with small gaps in the absence of air.
Its function is to prevent loosening and leakage due to shock and vibration.
The thixotropic properties of LOCTITE 2432 prevent migration or creep after application to surfaces.
-
ThreeBond 1401B Screw adhesive Thread fastening glue
Features
● Easy to disassemble.
● Suitable for all screws, especially small screws with more disassembly times.Related technical parameters
● Color: TB1401B is green; TB1401C is red
Main Ingredients: Vinyl acetate resin
● Viscosity: 350mpa · s
● Specific gravity: 0.88
● Non-volatile ingredients: 31% -
threebond 1530silicone material
-
TOAGOSEI 403TB Instant Adhesives ARON ALPHA
Aron Alpha primer made it possible to bond the “hard to be bond ” materials,
thus increasing the use of Aron Alpha -
Toagosei America Aron Alpha 221 Cyanoacrylate Adhesive Industrial Krazy Glue
Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on a variety of materials.
Low gap fill. Ethyl base monomer. Excellent on rubber/plastic substrates. Fair on metal substrates. Fair on porous substrates. Military Spec MIL-A-46050C Type 2. Military Spec MIL-A-46050C Class 1. A primer is required for hard-to-bond materials such as polyethylene, polypropylene, acetal, PET, nylon, soft PVC, silicone rubber, and glass.
General information about the Aron Alpha® product line: Cyanoacrylates are single component instant adhesives that bond a wide variety of surfaces with a strong, durable bond. They offer ease of application, a wide range of performance parameters, and reliable solvent-free bonding.