LOCTITE 2400 Screw glue Thread locking agent Acrylate anaerobic adhesive
Brand: LOCTITE
Model: 2400
Appearance: Red
Specification: 50 mi
Type: Acrylic
Curing speed: full setting 24 hours
Application: Mainly used in fastening screws, automobile industry, electronic appliances and so on
- 描述
- Global Tab
描述
Loctite 2400 glue screw glue, also known as screw fixative or anaerobic glue, is mainly used in electrical appliances, electronics, aviation machinery, automotive industry. You’ll see it wherever there’s a screw. Generally, lock the screw and point it on the screw, and let it slowly cure. On the one hand, the screw will not fall off in the operation, on the other hand, it has the effect of rust prevention. In the future, if you want to repair, you can remove it with 30% more force, and you can also apply glue to the screw, and then lock it up, so that the effect will be good.
相关产品
-
LOCTITE 272 designed for the permanent locking and sealing of threaded fasteners.
Loctite 272 is a single component, high temperature resistant, high strength, anaerobic thread locking adhesive. The product cures between two tightly fitting metal surfaces in an air – free environment. High temperature resistance up to 230℃, can be used for cylinder head double screw lock, need heating and use tools when disassembling.
LOCTITE 272 is designed for permanent use. Long locking and sealing threaded fasteners. When held in place without air between tightly fitted metal surfaces, the product cures and prevents loosening and leakage from shock and vibration. Typical applications include locking and sealing with large bolts and studs (M25 and larger).
-
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
LOCTITE 420 Quick-drying Adhesive for high and low temperature resistant metal plastics for general purpose
LOCTITE 420 is a clear, colorless, all-purpose adhesive containing ethyl capillarity. Applicable to metals, rubber and plastics, Primer LOCTITE SF 770 or LOCTITE SF 7239 can also be used in combination with polyolefin. The initial fixation time is 5-20 seconds.
Product Features
1. Fast curing between two surfaces
2. Ideal products for bonding small and medium sized parts
3. It has good adhesion to most substrates
4. Suitable for metal, rubber and plastic
5. The initial fixation time is 5-20 seconds
6. Capillarity
7. No solvent
-
LOCTITE STYCAST US 5544 fast gelling, flexible, flame retardant, mineral-filled, polyurethane compound.
Not for product specifications
The technical data contained herein are intended as reference only.
Please contact your local quality department for assistance and
recommendations on specifications for this product -
LOCTITE AA3052 UV-curable UV adhesive High Temperature impact resistant anaerobic glue acrylate
LOCTITE AA 3052 is an amber-colored, clear, UV-curing modified field-based acrylate anaerobic adhesive that rapidly cures on PRIMER N-treated metal surfaces in the absence of air. Excess glue can also be solidified into a solid by exposure to ultraviolet light. It can be used to bond glass, plastic, metal, ceramics, etc. inside motor enclosures, magnet assemblies, piezoelectric buzzers, and many other applications.
