Loctite 444 single component high strength quick drying glue transparent cyanoacrylate instant drying glue
Brand: LOCTITE
Model: 444
Color: Colorless and transparent
Specification: 20 g
Type: Ethyl
Assimilation rate: full solid 24 hours
Application: Mainly used in the electronic field of bonding metal, plastic, etc
- 描述
- Global Tab
描述
Loctite 444 Medium viscosity fast drying adhesive
Loctite 444 is a single component, fast curing, transparent, medium viscosity cyanoacrylate instant drying adhesive, this product is mainly used in the electronic field. Product 444 uses TAKPAK facilitator to achieve instantaneous curing to fix electronic components.
444 IS DESIGNED FOR SECURING JUMPERS AND SECURING WIRES TO COIL STANDS TO PREVENT MOVEMENT OF ADJUSTABLE PARTS, AND FOR SECURING SUPPORT INSULATOR EDGE GUIDES AND STIFFENERS TO CIRCUIT BOARDS.
相关产品
-
LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock. -
Henkel LOCTITE 460 Instant adhesive Low bleaching low odor quick drying adhesive Metal plastic rubber universal
The rate of cure will depend on the ambient relative
humidity. The best results are achieved when the relative
humidity in the working environment is 40% to 60% at 22°C.
Lower humidity leads to slower cure. Higher humidity
accelerates it, but may impair the final strength of the bond. -
Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
-
LOCTITE 420 Quick-drying Adhesive for high and low temperature resistant metal plastics for general purpose
LOCTITE 420 is a clear, colorless, all-purpose adhesive containing ethyl capillarity. Applicable to metals, rubber and plastics, Primer LOCTITE SF 770 or LOCTITE SF 7239 can also be used in combination with polyolefin. The initial fixation time is 5-20 seconds.
Product Features
1. Fast curing between two surfaces
2. Ideal products for bonding small and medium sized parts
3. It has good adhesion to most substrates
4. Suitable for metal, rubber and plastic
5. The initial fixation time is 5-20 seconds
6. Capillarity
7. No solvent
-
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification.
