Loctite 498 heat circular adhesive instant glue
Loctite 498 super bonder
Super glue
Heat circular
Medium viscosity, high temperature resistant products. Applicable to all metals and the vast majority of plastic and rubber. Temperature tolerance range is 106 degrees 121 degrees continuous or intermittent.
Packing: 20 grams of yantai imported 500 grams of yantai 1 oz
- 描述
- Global Tab
描述
Loctite 498 super bonder
Super glue
Heat circular
Medium viscosity, high temperature resistant products. Applicable to all metals and the vast majority of plastic and rubber. Temperature tolerance range is 106 degrees 121 degrees continuous or intermittent.
Packing: 20 grams of yantai imported 500 grams of yantai 1 oz
Typical use: the heat cycle
Color: transparent
Biggest fill gaps: 0.35
Type: universal has base
The shear strength of MPA: 19
Temperature range: – 54 degrees – 121 degrees Celsius
Curing speed: solid 50 seconds at the beginning of all 24 hours
Density: 1.1
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
Henkel LOCTITE 403 Quick Drying Adhesive Low odor low bleaching High strength quick drying adhesive multi-purpose active adhesive
LOCTITE 403 is a medium viscosity, low odor, low albino, alkoxyethyl transient dry adhesive suitable for use in difficult vapor control situations. It can quickly bond to a variety of materials, including metals, plastics and elastomers. Especially suitable for bonding porous or absorbent materials.
Product Features
1. Low odor, suitable for situations where steam control is essential
2. Low bleaching, suitable for the manufacture of cosmetics
3. Colorless and transparent
4. Very suitable for porous substrates
-
LOCTITE271 designed for the permanent locking and sealing of threaded fasteners.
LOCTITE
271 designed for the permanent locking and
sealing of threaded fasteners. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. Typical applications include the locking and sealing
of large bolts and studs (up to M25 ).Specific Gravity 25 °C 1.1
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 1, speed 10 rpm, 400 to 600LMS -
LOCTITE 401 designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength.
LOCTITE 401 designed for the assembly of difficultto-bond
materials which require uniform stress distribution and
strong tension and/or shear strength. The product provides
rapid bonding of a wide range of materials, including metals,
plastics and elastomers. LOCTITE 401 is also suited for
bonding porous materials such as wood, paper, leather and fabric. -
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
LOCTITE 272 designed for the permanent locking and sealing of threaded fasteners.
Loctite 272 is a single component, high temperature resistant, high strength, anaerobic thread locking adhesive. The product cures between two tightly fitting metal surfaces in an air – free environment. High temperature resistance up to 230℃, can be used for cylinder head double screw lock, need heating and use tools when disassembling.
LOCTITE 272 is designed for permanent use. Long locking and sealing threaded fasteners. When held in place without air between tightly fitted metal surfaces, the product cures and prevents loosening and leakage from shock and vibration. Typical applications include locking and sealing with large bolts and studs (M25 and larger).
