LO-TECH 7102 Epoxy resin GLUE
To be potted products need to keep dry, clean; use check the A agent, observe whether there is settlement, and A agent to stir evenly; according to the ratio of the amount, and weighing accurate, please remember that the ratio is the weight ratio Non-volume ratio, A, B mixture after the need to fully stir evenly to avoid curing is not complete; stir even after the timely filling, and as far as possible in the use of time to use fully mixed glue; Gradually penetrate into the product gap, if necessary, please carry out the second filling; curing process, please keep the environment clean, so that impurities or dust into the uncured glue surface.
pattex pxu
Applications:
Suitable for bonding; cork board, cork flooring, metal, rubber, leather, textiles and other materials; especially bonding plywood, fiberboard, particleboard, blockboard, decorative panels (fire board), decorative veneer, , Glass fiberboard, plexiglass, hard plastic, rubber blocks, metal / wood profiles and other products.
Not suitable for bonding foamed polystyrene, plasticized polyvinyl chloride and artificial leather.
pattex px4l2
Scope of application:
It is suitable for bonding wood, metal, rubber, leather, textile and other materials; especially adhesive plywood, fiberboard, particleboard, blockboard, decorative composite board (fire board), decorative veneer, aluminum plate, glass fiberboard, organic Glass, hard plastic, rubber blocks, metal / wood profiles and other products.
Not suitable for bonding foamed polystyrene, plasticized polyvinyl chloride, polyethylene, polypropylene, mirrors and some artificial leather.
pattex cg80
Construction temperature should be +7 ℃ to +35 ℃.
This product does not need to add water.
Do not mix this product with other materials or additives.
Cold area or low temperature conditions, please note that the product of antifreeze storage.
This product contains cement, water will produce alkaline reaction, so please protect the skin and eyes,
In case of contact please wash with water; in case of eye contact please seek medical attention.
PATTEX PXT4X-1
Suitable for paste wood, metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.