supply Metaflux 70-34 rust protection agent spray paint protective film
70-34 rust protection agent technical parameters
Use range
Vehicles, trucks, engineering vehicles, other machinery and equipment of the anti-corrosion maintenance;
A variety of metal structures on-site anti-corrosion maintenance;
Ship, rail industry, anti-corrosion maintenance.
Instructions
Before brushing, the need to remove the surface of the dust, oil, grease, wax, silicon and other dirt; can be used in the corrosion of the metal surface, need to remove the rust can be (st2 rust level).
Precautions
For outdoor use, you need another brush finish to prevent the coating from aging.
All coatings can be used as topcoats, overcoats, and are recommended for trial compatibility, especially coatings with high solvent content or aggressive solvents.
- 描述
- Global Tab
描述
Features
It is conductive and does not affect welding after drying.
Resistance to mechanical pressure;
Acid and alkali resistant and non-aggressive oils;
No acid, lead and zinc chromate.
Metaflux 70-34 rust protection agent, is a kind of rust with primer, also known as rust surface primer, can be directly coated with a certain corrosion of steel, so that rust passivation, and thus the rust into a protective layer, To achieve the role of rust protection. With a rust primer to play the role of the general primer, but also with other primers do not have the advantages. It is to solve the sandblasting, artificial rust, pickling rust in the harsh environment, labor intensity, poor construction conditions, affecting the health of workers, low efficiency, high cost, rust quality can not be guaranteed, dust, Environmental pollution and other issues, saving manpower, material and cost, to provide work efficiency.
70-34 rust protection agent technical parameters
Use range
Vehicles, trucks, engineering vehicles, other machinery and equipment of the anti-corrosion maintenance;
A variety of metal structures on-site anti-corrosion maintenance;
Ship, rail industry, anti-corrosion maintenance.
Instructions
Before brushing, the need to remove the surface of the dust, oil, grease, wax, silicon and other dirt; can be used in the corrosion of the metal surface, need to remove the rust can be (st2 rust level).
Precautions
For outdoor use, you need another brush finish to prevent the coating from aging.
All coatings can be used as topcoats, overcoats, and are recommended for trial compatibility, especially coatings with high solvent content or aggressive solvents.
Get free sample or more information , please contact me with my email: jenny@fuji-hk.cn . thank you .
相关产品
-
Metaflux Zinc Sheen Spray 79-01 zinc flake coating
Sprayed on bare metal surface, so that can be anti-corrosion of the shiny zinc coating, repair damaged zinc coating, weld and construction of metal due to damage and damage to the surface, spot welding, all the metal body spray, drilling And re-coating of welds, construction primitives as bad weather, agricultural equipment, port facilities and shipbuilding, etc.
-
METAFLUX 70-05scale inhibitor corrosion inhibitor
Product Description: The 70-05 series is a special rust-removing solvent for fastened stuck bolts. It is an efficient “liquid wrench” that can penetrate into oil, grease and carbonized oil. A few minutes will be able to loosen a variety of serious corrosion or stuck bolt parts, and can quickly remove the various due to freezing shrinkage, corrosion and burr caused by the phenomenon of screw stuck. Product viscosity below water and penetration is stronger than the traditional stripping oil, does not contain any acidic substances (especially phosphoric acid), does not contain any grease or oily substances, the composition of non-toxic side effects. Through the cooling shrinkage to rust the loose bolts, the treated place 10 to 15 minutes after the automatic decomposition, will not produce fisheye effect. The treated surface can be sprayed after 15 minutes
-
Metaflux 70-40 zinc thermal lead polishing Zinc paste
product manual:
Gray epoxy, suitable for long-term protection of metal surfaces. Manufactured in accordance with European specifications DIN50.976 / 1980. Zinc powder purity of 98.5% to 99%, surface dry zinc content of 96%. Can be reliably adhered to all metal surface .20 ℃ after 10 minutes after the hand touch, the full curing time of 80 ℃ for 24 hours; outer drying time of 20 ℃ 60 to 120 minutes. Dry after the cracks will not produce a brushing thickness of 150μm. Dry after dull and dull, can withstand temperature 800 ℃, dry after the excellent conductivity. -
METAFLUX 70-78 Stainless steel coating
Quality assurance:
1. Vinner is equiped with world advanced computer driving production lines
2. Whole set of pure water processor line featured with RO anti-saturation and advanced testing devices
3. Manufactured in Class 100,000 Cleanroom -
Metaflux 79-06 Porcelain cold galvanized spray magic oil sex spray
Potter Zinc Spray 79-06
“Cold galvanized spray” is the surface temperature treatment, unlike hot galvanized, but has the same effect of hot galvanizing rust.
Zinc spray is a major technological breakthrough for the 1975 Metaflux Swiss plant. For the first time in the world, high purity, high content, ultra-small size zinc spray through the aerosol cans to form metal and cathode zinc layer, and obtain a patent certificat