Materials and RongTie fund and aluminum, copper, zinc and metal plating, polyamide/polyurethane foam, polystyrene foam, ceramic, Lin Cai Cure time 10 hours The color yellow, impact resistance Shear strength of 19 N/mm Package type double cylind
• Gray paste
• High temperature and chemical resistance
• Low shrinkage
• Excellent resistance to water and resistance to various chemical media
• Fill the gap with a sag thickness of up to 5 mm
Low volatility Can last 120 high temperature resistance temperature limit resistant to winter
Excellent resistance to water and all kinds of chemical medium
Fill the gap flow can reach five mm thickness
For a variety of base material has good bonding performance
Araldite2014A/2014B is A two-component Room temperature curing adhesive paste liquid
High strength Good toughness it has thixotro`
Araldite 2015 Epoxy resin is a two-component, room temperature curing, flexible adhesive paste adhesive. Araldite 2015 with thixotropy, hanging thickness of up to 10mm. Lovely 2015 is particularly suitable for bonding SMC and GRP.
Two component clear epoxy adhesive system
Key properties • Low viscosity, water white adhesive
• Especially suitable for glass and ceramic bonding
• Suitable for clear castings and laminates
• Refractive index similar to that of glass
2020 is a two component, room temperature curing, low viscosity adhesive specifically designed for glass
It is also suitable for bonding a wide variety of metals, ceramics, rubbers, rigid plastics and most other materials in
The strength and durability of a bonded joint are dependant on proper pretreatment of the surfaces to be bonded. At
the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, iso-propanol (for plastics)
or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt.
Low grade alcohol, gasoline (petrol) or paint thinners should never be used.
The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”)
the degreased surfaces. Abrading should be followed by a second degreasing treatment
Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces. Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18-24°c room temperature).
Apply mix to both joint surfaces.
Assemble parts and hold together with clamps,tape, string or weights,etc. for 10 – 15 minutes. The newly bonded joint can be handled after 3 hours and attains its full strength after about 8 hours.
Araldite Aloe AV138M / HV998 is a versatile, two-component epoxy resin adhesive, A glue: AV138M, B glue: HV998; a paste in the room temperature curing or curing at room temperature epoxy resin AB adhesive strength High, good toughness, low volatility, the ability of 120 ℃ high temperature, can be cured at 5 ℃. When fully cured, the adhesive has excellent high temperature resistance and high corrosion resistance. It is suitable for bonding all kinds of metals, ceramics, glass, rubber, hard plastic and most commonly used materials, and can be widely used in industries resistant to harsh environmental requirements. Because of its low volatility, it is suitable for the special electronic communications industry and the aviation industry.