-
LOCTITE 207 Transparent universal silicone high temperature resistant thixotropic plane sealing glue
Brand name: Henkel LOCTITE
Product type: general silicone plane sealing silica gel
Product model: Loctite SI207
Product specification: 300ml
Product color: transparent
Operating temperature: -54℃ to +204 ℃
Extrusion rate: 25~40g/min
Material: suitable for polycarbonate, general plastics, mirrors, non-ferrous metals, concrete and ceramic materials
Application scenario: It is suitable for stamping and sealing of power machinery, automobile, engineering machinery, internal combustion engine, mining machinery and electrical equipment -
LOCTITE 222 for the locking and sealing of threaded fasteners
For Assembly
1. For best results, clean all surfaces (external and internal)
with a LOCTITE®
cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too
slow, spray all threads with Activator SF 7471™ or SF
7649™ and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not
allow the tip to touch metal surfaces during application.
5. For Thru Holes, apply several drops of the product onto
the bolt at the nut engagement area.
6. For Blind Holes, apply several drops of the product down
the internal threads to the bottom of the hole.
7. Assemble and tighten as required.
8. For Sealing Applications, apply a 360° bead of product
to the leading threads of the male fitting, leaving the first
thread free. Force the material into the threads to
thoroughly fill the voids. For bigger threads and voids,
adjust product amount accordingly and apply a 360° bead
of product on the female threads also. -
LOCTITE 232 Motor rotor glue Motor magnetic steel bonding adhesive cylinder holding anaerobic adhesive
LOCTITE 232 Methyl methacrylate acrylate fixation compound. Its lubricating properties can facilitate the assembly of high interference or high torque materials. LOCTITE® 232 Brown, opaque acrylic methacrylate is an acrylic acid compliant curable. Its lubricating properties can facilitate the assembly of high interference or high torque materials. It prevents damage during disassembly and eliminates corrosion at the interface due to higher disassembly forces. The typical application of this product is high torque thread assembly and heavy fit.
-
LOCTITE 2400 Screw glue Thread locking agent Acrylate anaerobic adhesive
Brand: LOCTITE
Model: 2400
Appearance: Red
Specification: 50 mi
Type: Acrylic
Curing speed: full setting 24 hours
Application: Mainly used in fastening screws, automobile industry, electronic appliances and so on -
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts -
Loctite 248 anaerobic glue rod medium strength glue high temperature resistant fastening sealing anti-drop bolt thread locking glue
Convenient glue stick form to prevent dripping
Prevent loosening of vibrating assemblies such as pumps, gearboxes or presses
Available on all metals, including blunt substrates (e.g. stainless steel, aluminum, electroplated surfaces)
It has been shown to tolerate minor contamination from industrial oils such as motor oil, anticorrosive oil and cutting fluid
Manual tools are allowed for disassembly -
LOCTITE 263 designed for the permanent locking and sealing of threaded
LOCTITE
263 is particularly suited for heavy duty
applications such as studs into motor housings, nuts onto studs
in pump housings and other fasteners where high strength is required -
LOCTITE 272 designed for the permanent locking and sealing of threaded fasteners.
Loctite 272 is a single component, high temperature resistant, high strength, anaerobic thread locking adhesive. The product cures between two tightly fitting metal surfaces in an air – free environment. High temperature resistance up to 230℃, can be used for cylinder head double screw lock, need heating and use tools when disassembling.
LOCTITE 272 is designed for permanent use. Long locking and sealing threaded fasteners. When held in place without air between tightly fitted metal surfaces, the product cures and prevents loosening and leakage from shock and vibration. Typical applications include locking and sealing with large bolts and studs (M25 and larger).
-
Loctite 290 motor magnetic steel magnet glue thread locking anaerobic adhesive engine motor adhesive
LOCTITE® 290 is a liquid medium/high strength thread locking agent used to secure and seal threaded fasteners. The product penetrates between meshing threads through low viscosity and capillary penetration without disassembly before coating. This product is solidified between tightly matched metal surfaces and isolated from air to prevent loosening and leakage caused by shock and vibration. The product can also be used to fill microholes in welded, cast or powder metallurgy parts.
-
LOCTITE 319 Universal Structural adhesive adhesive single component UV setting glue
-
LOCTITE 3220 is designed for use in heat sensitive devices.
The above cure profiles are guideline recommendations. Cure
conditions (time and temperature) may vary based on customers’
experience and their application requirements, as well as customer
curing equipment, oven loading and actual oven temperatures. -
LOCTITE 326 typical applications include bonding ferrites to plated materials in electric motors, loudspeaker hardware and jewelry where fast fixturing is required.
Where aqueous washing systems are used to clean the
surfaces before bonding, it is important to check for
compatibility of the washing solution with the adhesive. In
some cases these aqueous washes can affect the cure and
performance of the adhesive.
