-
DOWSIL OS-20 Odorless environmental protection thinner Insulation coating three – resistant paint
Brand: Dow Corning
Model: OS – 20
Origin: USA
Specification: 15 kg
Shelf life :24 months
Curing speed: full solid 24 hours
Curing type: self-drying type -
DRY Lube with Teflon fluoropolymer
Finish Line’s Dry Lube goes on wet and sets up with a dry ‘wax-like’ synthetic film that helps keep your chain clean by not absorbing excessive amounts grit, grime, or dust. Thanks to the added Teflon™ fluoropolymer, Finish Line’s Dry Lube minimizes pedaling friction, repels moisture, and withstands rides up to 100 miles. An extremely versatile lubricant and a perfect choice for many road and off-road cyclist
-
DRYSURF A-2264EL Quick-drying lubricant that dries instantly after application
Compared to grease, the product causes little running or staining, and is optimally used to increase lubricity or prevent noise on surfaces where grease cannot be applied. As it may be applied in thin layer, viscosity resistance can be kept low in precision sliding areas.
-
DRYSURF Havis MDF-2400EL Dry Lubricant skin film oil metal plastic rubber to prevent wear
The Vis DRYSURF MDF series are fast drying lubricants which include fluorine inert solvents and are used in developed countries for electronic equipment, office supplies equipment and optical equipment. The product is compatible not only with metals but also with most plastics.
Characteristics of the
1. Can be used for any mechanical parts;
2 can be dried in a few seconds at room temperature;
3. Operating temperature range from -50 to 350℃;
4 Matches metal and most plastics.
application
Long – acting lubrication can prevent gear and CAM wear. -
DRYSURF HLV-60 Base Oil germany lubricant oil
Widely used in audio and video equipment and other products need clean and lubricated precision parts, such as CD-ROM discs slide, cameras, digital cameras, optical instruments telescopic lens and internal lubrication.
-
Dymax 3-20796 UV curing Polyurethane resin glue
Typical application flexibility, strong, medium viscosity, adhesive application range is wide, including plastic assembly and potting
-
EccoGreaseEM20-1 Long-acting plastic grease
Performance characteristics:
Wide working temperature range, low temperature starting and running torque;
Excellent bearing capacity and wear resistance, can eliminate noise for a long time;
Very low friction coefficient, evaporation loss and diffusivity, very long service life;
Good oxidation stability, mechanical stability, colloidal stability and anti-aging ability;
Excellent water resistance and corrosion protection, well compatible with most plastics and elastomers
-
Eco705 Solder M705 Environmental lead-free solder solder solder solder solder
Product name: Lead-free solder paste
Brand: Japan Thousand Residence /SMIC
Melting point :217-2190
Size :500g
Model number :M705-GWS-SGST4 -
Elantas S003 A mixed solvent with cresol as the main component.
A mixed solvent with cresol as the main component. It is mainly used as diluent of polyurethane, polyester and polyesterimide paint, or diluent of similar solvent system paint. It has good solubility for polyurethane, polyester and polyesterimide enameled wire paint, which helps to improve the leveling performance of the paint
-
Elantas BZ1806-42M refers to a protective coating designed to conform to the surface of an assembled printed circuit board and electronic components.
Single-component, clear, modified polyurethane resin system for thin film build, air dry or heat curing, UV tracer, excellent dielectric properties. BZ1806 is environmental friendly product, free from aromatic solvents such as ben-zene, toluene, xylene and C9 aromatics. BZ1806 for spraying application, BZ1806@50% for dip and brush application to achieve thick film coating. BZ1806 series coatings are in compliance with IPC-CC-830.
-
Emerson&Cuming Eccobond 2332-17
Emerson&Cuming 2332-17 is a single component, heat curing, gray general-purpose epoxy adhesive and sealant. It is pasty, good resistance to collapse and long storage at room temperature. 2332-17 has excellent surface brightness, excellent heat resistance, water resistance and superior dielectric properties after curing. Applications:2332-17 is mainly used for insulation bonding of copp
-
Emerson&Cuming Eccobond G-500
Emerson&Cuming G500 is a single component, heat curing, gray general-purpose epoxy adhesive and sealant. It is pasty, good resistance to collapse and long storage at room temperature. G500 has excellent surface brightness, excellent heat resistance, water resistance and superior dielectric properties after curing. Applications:G500 is mainly used for insulation bonding of copper and other metal and hard plastic. Can also be used to do the coil thread fixed bonding and so on.
