Vehicles, trucks, engineering vehicles, other machinery and equipment of the anti-corrosion maintenance;
A variety of metal structures on-site anti-corrosion maintenance;
Ship, rail industry, anti-corrosion maintenance.
Before brushing, the need to remove the surface of the dust, oil, grease, wax, silicon and other dirt; can be used in the corrosion of the metal surface, need to remove the rust can be (st2 rust level).
For outdoor use, you need another brush finish to prevent the coating from aging.
All coatings can be used as topcoats, overcoats, and are recommended for trial compatibility, especially coatings with high solvent content or aggressive solvents.
Pressure-sensitive range is reached in this curing process about 10 min. after application. If adherends are put together during this time, they bound instantaneously as in the case of rubber contact adhesive, eliminating the need for temporary fixation.
Tamiya at XF – 1
Tamiya at it, method of post coating, paint, matt Black, Flat, Black,
Japan TAMIYA corporations of model making coating, XF – 1, the capacity of 10 ml
Toys kingdom of the world, models ranging paint coating method
Extinction black XF – 1 is mainly used in toys in the tanks, planes, ships and other coating) enamel paint.
Application: It is used to fill the gap between the front and rear windshield and the edge of the car body. The gap between glass and rubber and between rubber and steel plate can be filled. Also suitable for dry wood, canvas, leather, cardboard, blankets, washing machines, cold and soft air-conditioning and other industrial equipment products and door frame edge buffer rubber adhesive, suitable for the adhesion of dry interior decoration materials synthetic rubber adhesive. [ notes ]366E contains hazardous ingredients toluene and N-hexane, 366FE contains hazardous ingredients toluene.
1. Highly flammable liquids and Vapors
2. Harmful if swallowed
3. Causes mild skin irritation, severe eye irritation long-term or repeated exposure may cause injury to organs if ingested and harmful to the respiratory tract harmful to aquatic organisms keep away from ignition sources, no Smoking 2. Keep container in well ventilated place 3. Close Container 4. Wear appropriate protective clothing, gloves, eye/face protectors 5. If contact with eyes, wash immediately with a large amount of water and seek medical attention. Do not induce vomiting. 8. Avoid release into the environment, according to the use of materials, different environment and measured data error code.
The surface is not sensitive
Universal type, medium viscosity. Used for bonding porous, acid and absorptive materials.
Main adhesive backing material: leather metal expect rubber wood paper, etc.
Color: colorless to straw color
Get free sample or more information , please contact me with my email: email@example.com . thank you .
Directions for use:
1. For best performance bond surfaces should be clean and
free from grease.
2. This product performs best in thin bond gaps (0.05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup
solvents, nitromethane or acetone.
Loctite Material SpecificationLMS
LMS dated September-01, 1995. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
KS609 is a thermal conductive grease. It has excellent thermal properties (thermal conductivity 0.75WM / K),
General using for electronic devices.
The product is excellent insulation properties, volatile small and easy to use. Excellent Heat – resistant and cold – resistant .
Wide temperature range, no cure with low temperature -50 ℃ .
Loctite Loctite 2432 is a medium strength thread locking agent. This adhesive has very low halogen and sulfur content and is specifically designed for metals that are sensitive to these contaminants used in the nuclear industry, such as titanium. You can use hand tools to separate parts.
Disassembly of products used to brake and seal threaded joints can be easily accomplished using traditional hand tools.
It is especially suitable for stainless steels that do not use surface activators.
Polymerization occurs when the product is confined between metal surfaces with small gaps in the absence of air.
Its function is to prevent loosening and leakage due to shock and vibration.
The thixotropic properties of LOCTITE 2432 prevent migration or creep after application to surfaces.