-
Henkel LOCTITE UV9060F UV moisture double curing adhesive Acrylic resin High thixotropic
LOCTITE ECCOBOND UV 9060F, acrylic resin, UV/ moisture dual cure system, high thixotropic, fluorescent detection, component encapsulation and chip corner reinforcement
-
Henkel loctiteAA352 UV UV adhesive light curing resistance to impact tough flexible metal glass bonding
Brand: LOCTITE
Model number: AA 352
Specification: 1000ML
Shelf life: 24 months
Component: Single component
Characteristics: Moisture resistance, toughened bonding
Application: Bonding metal, wood, etc -
Henkel LOCTITEEA 9497 Two-component epoxy resin adhesive AB Structural adhesive is peel and impact resistant
Name :LOCTITE
Model number :EA 9497
Specification :50ml
Mixing ratio :2:1
Shelf life :24 months
Type: epoxy resin
Application: bonding metal, plastic, etc -
Henkel LOCTITESF 7200 gel remover 00 Metal gasket cleaner Universal cleaner
Brand: Henkel Loctite
Product name: gasket remover
Specifications: 400ml
Application: Component cleaning
Key parameter: solvent type -
Henkel Sicomet 99 Instant adhesive
Product model: sicomet99
Brand: Loctite
Product color: transparent colorless to pale yellow
Application: Suitable for electronic components, leather, plastic, rubber, stone, metal, wood.
◆ Packing: 20g
◆ Applicable temperature (℃): – 30/100
Recommended accelerator: sicomet hi speed bs accelerator beschleuniger -
Henkel TECHNOMELT PUR 4663 Milky White Multi purpose Active hot melt adhesive cold and heat resistant multi purpose
- High initial strength
- Chemical cross-linking within few days
- Bond joint turns into a thermoset
- Very high heat resistance and cold flexibility
- Excellent water resistance
- Resistant to most solvents
-
Loctai 3623 one component transparent medical grade UV curing adhesive UV glue
Use guide
1. The product is photosensitive. Store and operate away from sunlight, ultraviolet and artificial light.
2. The product shall be dispensed with dispensing equipment with black feeding pipe.
3. For best results, the surface of the bonded material should be clean and free of grease.
4. The curing speed depends on the intensity of the light source, the distance from the light source, the curing depth, the bonding gap and the transmittance of the material..
5. For temperature sensitive bases, such as thermoplastics, cooling is required.
6 crystalline and semi-crystalline thermoplastics contact liquid glue need to check whether there is the possibility of stress cracking.
7. Excessive uncured adhesives can be removed by organic solvents (e.g. acetone).
8. The adhesive shall be cooled before bearing any load.
-
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE 620 Cylindrical adhesive High strength anaerobic adhesive high temperature resistant adhesive for bearing gear
The LOCTITE620 is mainly suitable for bonding cylindrical assembly parts. The product cures in isolation from air between two closely fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical uses include filling tight fitting press fitting, gaps between key grooves and splines; Assembly bearing and bushing, and make the press fit bond holding strength higher. It is especially suitable for the condition that the temperature must reach 200°C.
-
LOCTITE 222 for the locking and sealing of threaded fasteners
For Assembly
1. For best results, clean all surfaces (external and internal)
with a LOCTITE®
cleaning solvent and allow to dry.
2. If the material is an inactive metal or the cure speed is too
slow, spray all threads with Activator SF 7471™ or SF
7649™ and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging in the nozzle, do not
allow the tip to touch metal surfaces during application.
5. For Thru Holes, apply several drops of the product onto
the bolt at the nut engagement area.
6. For Blind Holes, apply several drops of the product down
the internal threads to the bottom of the hole.
7. Assemble and tighten as required.
8. For Sealing Applications, apply a 360° bead of product
to the leading threads of the male fitting, leaving the first
thread free. Force the material into the threads to
thoroughly fill the voids. For bigger threads and voids,
adjust product amount accordingly and apply a 360° bead
of product on the female threads also. -
LOCTITE 243 medium strength Threadlocking Adhesive
LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces.
-
LOCTITE 243 designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools
Prevail Torque 180°, ISO 10964, Pre-torqued to 5 N·m:
M10 black oxide bolts and mild steel
nuts
N·m 4
(lb·in) (35)
3/8 x 16 steel nuts and bolts N·m 3.5
(lb·in) (30)
Compressive Shear Strength, ISO 10123
Steel pins and collars N/mm² 7.6
(psi) (1,100)
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate nuts and bolts N·m 26
(lb·in) (230)
M10 stainless steel bolts and nuts N·m 17
(lb·in) (150)
TYPICAL ENVIRONMENTAL RESISTANCE
Cured for 1 week 23°C
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
M10 zinc phosphate steel nuts and bolts