-
KONYBOND CU600 Woodworking glue
Suitable for plastic and plastic, plastic and metal, and rubber parts, to play its insulation, moisture, rust, anti-static, dust effect.
-
LO-TECH 7102 Epoxy resin GLUE
To be potted products need to keep dry, clean; use check the A agent, observe whether there is settlement, and A agent to stir evenly; according to the ratio of the amount, and weighing accurate, please remember that the ratio is the weight ratio Non-volume ratio, A, B mixture after the need to fully stir evenly to avoid curing is not complete; stir even after the timely filling, and as far as possible in the use of time to use fully mixed glue; Gradually penetrate into the product gap, if necessary, please carry out the second filling; curing process, please keep the environment clean, so that impurities or dust into the uncured glue surface.
-
LOCTITE 243 medium strength Threadlocking Adhesive
LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces.
-
Loctite 3201 Light Cure Adhesive
Loctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal streLoctite® 3201™ is a nonfluorescing, high viscosity, UV/Visible light cure adhesive that forms very flexible joints with minimal stress cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.ss cracking. Ideal for bonding polycarbonate and other thermoplastics. ISO-10993 Biological Tested for medical device use.
-
Loctite 403 Low odour and low bloom alkoxyethyl instant adhesive.
LOCTITE 403 is a medium viscosity, low odour, low blooming alkoxyethyl-based product is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for bonding porous or absorbent materials.
-
LOCTITE 416 general purpose ethyl-based instant adhesive
LOCTITE 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE 770 or LOCTITE 7239. It has a fixture time of 20 – 40 secs.
-
Loctite 7400 instant dry marking adhesive red instant dry adhesive high strength electronic equipment marking ink electronic marking liquid
Loctite product 7400 is a solvent based dark red marking ink for use on electronic equipment. The product dries quickly and has excellent adhesion to a range of materials. It is ideal for tamperproofing adjustment points or marking components to indicate they have been set or tested. Physical Properties.
-
Lotech UV adhesive
Mostly for area where low movement, high resistance to penetration and pressure are required.
Areas requiring intumescent sealing. -
METAFLUX 70-78
Specifications: 400ml / support
1. Very high stainless steel content
2. High alloy stainless steel particles and weather resistant synthetic resin to form a good stainless steel corrosion
3. Color: stainless steel, chrome: 18%, nickel: 8%, manganese: 2%
4. Maximum heat-resistant temperature: 300 ℃ Application: applicable to all metals, wood, glass, ceramics and most of the plastic5. Metaflux 70-78 stainless steel spray has excellent stainless steel coating
6. Good weather resistance, with anti-corrosion ability
7. Anti-wear
8. Quick dry, dry for 5 minutes -
Mobil DTE Oil AA
Applications
These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. They are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified.
- Moderate duty spur, bevel, helical and herringbone gear units
- Circulating systems
- Mobil DTE Oil Extra Heavy and BB can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic fluids are required and clearances are relatively large
- Certain compressors and vacuum pumps handling air, natural gas and inert gases provided the discharge temperatures do not exceed 150°C
-
Mobil UNIRE N2 DTEFM Lubricant Grease Oil
Mobil Gundam ™ Series N is a high quality composite lithium base grease suitable for use in high temperature rolling bearings. These versatile greases are suitable for a variety of industrial applications, especially for electric motor lubrication
-
Mobil UX EP3 grease
Mobilux EP (Mobilux EP) series 0,1,2,3,460,004 and 023 is a series of high-performance grease, of which five are general industrial grease, two for the special
Semi-fluid grease. These hydroxy-stearic acid lithium-based greases are formulated to provide super anti-wear, anti-corrosion and anti-water rinsing and other protective properties
