-
Nye uniflor 8172 grease PTFE thickened low viscosity completely fluorinated grease.
Nye fluorocar bonuniflor 8172 anti rust grease
A PTFE thickened synthetic hydrocarbon grease with medium viscosity is used in automobile and industrial control. It needs light viscosity and its damping characteristics change little with temperature
-
OEM silicone
Packaging & Delivery- Packaging Details:
- silicone sealant 80g/piece
- Delivery Detail:
- 7-15 days
-
Original 3M dp100FR two component fire retardant insulation high viscosity structural adhesive flame retardant epoxy resin AB structural adhesive
3M DP100FR Structural Adhesive is suitable for load-bearing formulations of metals, rubber, glass, and more The smooth and flat connection surface is conducive to material replacement, reducing machining, reducing weight, more durable and lower cost.
DP100FR epoxy adhesive features:
1. Transparent
2. High performance, fast curing epoxy resin, 15-20 minutes to reach operating strength, with good peel and shear strength.
3. 3M DP100FR is a hard epoxy resin structural adhesive, which is widely used in loudspeaker audio products.
4. Suitable materials: ABS, rigid PVC, polycarbonate, polypropylene, FRP fiber reinforced plastic, steel, iron, nitrile rubber.
-
Original 3M DP8005 off-white epoxy acrylic resin adhesive two component impact resistant structural glue
DP8005 is a two-component adhesive, translucent after solidification, the ratio is 10:1.
It is a fast curing adhesive that adheres to low surface energy polyolefin materials (meaning better for plastic types) without surface treatment. Excellent environmental tolerance, excellent aging resistance. Operating time at 24C :2.5-3 minutes. Operating strength can be reached in 2-3 hours. Mechanical construction products, with strong adhesion.
It is mainly used for the bonding of refractory materials, especially nylon, polypropylene, polyethylene and other refractory plastics. Such as nylon, PP and so on. -
Original authentic 3M 94 electronic double-sided adhesive adhesive for adhesive surface treatment for plastic adhesive for adhesive bottom coating
Used to guide the
1, bonding surface preparation
• Clean the bonding surface with a non-shedding cloth dipped in 50% isopropyl alcohol, acetone or toluene.
2, operation
• Shake the bottle with 3M 94 base glue vigorously before use.
• Use 3M special tool or brush, roller (without fiber falling off), 94 adhesive evenly coated on the bonding surface, the general coating thickness is 2~4u.
3. Drying time
• Drying time generally depends on temperature, humidity, coating thickness.
• Normal drying time: 1 minute to 1 hour
• Optimal drying time: 10 min ~30 min (temperature: 23℃, humidity: 65%)
• Pay attention to the coating surface is absolutely free from contamination
4, double-sided tape bonding
• Apply double-sided tape to the dried coated surface and apply pressure.
Points for attention:
•1, 3M 94 bottom glue is a chemically active substance, so each time to use, only take out the day (8 hours) of the amount, the rest is still sealed and stored.
•2. The operating environment should be well ventilated and kept clean.
-
Original authentic 3M k-520 bottom coating high temperature resistant transparent yellow automobile double-sided adhesive special adhesive
Method of use:
The adhesive surface shall be cleaned with 50% acetone solution, and the surface shall be thoroughly dried with a brush (without fiber falling off), and the bottom glue shall be evenly coated on the adhesive surface with a coating thickness of 0.05MM. The adhesive tape can be pasted after the bottom glue is dried.
-
Original authentic 3M K500 bottom coating primer Double-sided tape adhesive aid glue special glue for automobile bottom
Capacity: 1 l
Type: Moisture absorption
Adhesive surface :AAS,ABS,AES,EPDM,PP, etc.
-
Original authentic 3M Novec 72DA electronic fluorinated liquid cleaning liquid cleaning agent
-
Original authentic 3M PR1500 transparent strong fast drying glue High strength rubber plastic bonding adhesive
Product Use:
Rubber and plastic bonding
1. For plastic bonding, rubber bonding or metal bonding and/or composite surface bonding, showing excellent bonding performance;
2. In the adhesive PVC, ABS, nylon, EPDM, TPV rubber and fluorine rubber also show excellent performance.
-
Original authentic 3MDP190 grey two component flexible epoxy resin AB structure adhesive glue
DP190 is A two-component A and B adhesive, which is a gray AB adhesive with a ratio of 1:1. It has a long operation time. After solidification, it is a flexible epoxy resin, which can reach the operation strength in 8-12 hours. Especially suitable for bonding and packaging of electronic parts. A variety of formulations are available for bonding steel, aluminum, copper, plastics, glass, wood, masonry, and other materials with low surface energy levels.
-
Original authentic 3MSP-7533 milky screen printing glue Water-soluble adhesive water-based pressure sensitive glue
[User Guide] :
1) Equipment: semi-automatic or manual screen printing machine;
2) Screen :70-150 mesh polyester mesh and stainless steel, mesh tension :14-18
3) Scraper: hardness of 60-70 degrees polyurethane material, scraping Angle :60-80 degrees;
4) Drying conditions: 25-30 minutes; 50 degrees — 15 minutes; 70 degrees. -5 minutes.
[Product Application] :
1) Fixing all kinds of panels, nameplates, panels with Windows through and panels with irregular surface shape of electronic and electrical appliances and automobiles;
2) All kinds of film switches;
3) Coated with noise damping materials such as foam and rubber;
4) Bonding plastic and stainless steel, aluminum and other metal panels;
5)SMT patch bonding;
6) Self-adhesive coating. -
Original authentic Dow Corning 1-2620 three anti paint conformal coating elastoplastic coating protection glue
Curing time: 72 hours Dielectric strength: 450 Hardness: 25 D Burning point: 13℃ RTDry time: 20 min Operating temperature: -45 to 200℃ Curing system: RTV RTDry time: 1-24 hours