-
Original authentic DYMAX Damas 3094-T high strength resistance to high and low temperature UV shadowless glue
It has the advantages of fast drying, odorless, high strength, good toughness, high and low temperature resistance, waterproof, moisture-proof, non-yellowing, non-white, non-sticky hand, non-sticky dust, full transparency, high adhesion force and so on. It is mainly used for self-adhesive and mutual adhesive of PMMA, PC, ABS, PVC, PS, glass, metal and other materials.
-
Original authentic Henkel Loco JM7000 high temperature conductive die silver adhesive conductive adhesive bonding space chip
Subsequent post-mount thermal exposures (e.g., lead bonding and/or higher 370℃ caps) do not generally degrade product performance. JM7000 comes with pre-mixed and frozen 3cc syringes that can be transported on dry ice and should be stored at -40c.
-
Original authentic Henkel LOCTITE4307 High temperature resistance impact UV curing UV adhesive
LOCTITE 4307 is designed for adhesive applications requiring rapid fixation, fillet cure, or surface cure. Uv curing features help to cure exposed surface areas quickly, thereby minimizing frosting and providing an alternative to solvent-based accelerators. Suitable for assembling disposable medical equipment.
-
Original DYMAX Damas 6-621-GEL thermocurable UV glue is used for bonding metal plastic fillers
Dymax(Dymas) UV glue 6-621 is used for bonding glass/metal with phenolic resin and plastic filler. Exposure to ultraviolet/visible light, heat and catalyst curing; High tension; Suitable for hard substrate assembly; Transparent, strong adhesion. Dymax6-621 series adhesives form clear, hard adhesives. Suitable for glass, metal, phenolic resin, nylon, ferrite, ceramic and other materials. Can be used for metal and glass bonding, coil winding, perfusion, etc.
-
Original Henkel LOCTITE LOCTITE 2700 Glue bearing motor motor adhesive thread locking anaerobic adhesive
No danger signs, no risk phrases and no safety phrases; “White” material safety data sheet
High strength universal thread locking adhesive provides the best results
Prevents loosening of components caused by vibration, such as pumps, gearboxes or presses
Suitable for all metals, including passive substrates (e.g. stainless steel, aluminum, electroplated surfaces)
It can be decomposed by heating to 300°C.
WRAS certification (BS 6920): 1104508 -
Original Henkel LOCTTIE Loctite 190024 UV curing adhesive liquid optical UV shadow free glue
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.12
Viscosity, Brookfield – HBT, 25 °C, mPa·s (cP):
Spindle TB, speed 10 rpm, , Helipath 18,000 to 35,000LMS
TYPICAL CURING PERFORMANCE
LOCTITE®
DSP 190024™ can be cured by exposure to UV
and/or visible light of sufficient intensity. Surface cure is
enhanced by exposure to UV light in the 220 to 260 nm range.
Cure rate and ultimate depth of cure depend on light intensity,
spectral distribution of the light source, exposure time and light
transmittance of the substrate through which the light must
pass.
Fixture Time
UV fixture time is defined as the light exposure time
required to develop a shear strength of 0.1 N/mm².
UV Fixture Time, Glass microscope slides, seconds:
6 mW/cm², measured @ 365 nm ≤10LMS -
Original LOCTITE 28630 Transparent Quick Drying Glue Low bleaching low viscosity good permeability universal quick drying glue
Loctite 28630 instant dry glue Features:
1. Low albinism
2. Penetration level
Loctite 28630 Instant dry adhesive Application scope:
Widely used in ink cartridge and general industry, low viscosity, good permeability. Suitable for rubber, plastic, electronic industry, metal, toys, all kinds of buttons and other materials bonding.
-
Original LOCTITE LOCTITE 325 structural glue 50ml clear colorless high temperature resistant acrylic adhesive
Loctite 325 structural adhesive Typical application:
Loctite 325 structural adhesive has excellent temperature resistance. The activator Loctite 707 can be used to help solidify between two tightly attached parts. It is mainly used for bonding rigid metal parts to the surface of metal or ceramic materials under the condition of thermal cycling, such as the bonding of motor parts
-
Original LOCTITE511 single component anaerobic glue acrylic pipe thread sealant
Brand: LOCTITE
Model: 511
Specification: 250 ml
Origin: China
Shelf life :12 months
Component: Single component
Properties: Thixotropic, medium and high viscosity applications: bonding metal, ceramic, etc -
PATTEX PX34
Product Usage:
Applicable scope: plastic, wood, rubber, leather, wool, pine, hard PVC and metal bonding, wrapping and inlaid curved surface decorative panels, the combination of various types of fine wood products, etc., especially for The bronzing plate of the bronzing machine is bonded to the steel plate.
Not suitable for soft PVC, PS foam and polyethylene. -
pattex px4l
Suitable for metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.
-
PATTEX PX4L1
Suitable for metal, rubber, leather, fabric and other materials. Especially paste plywood, fibreboard, planing
Decorative panels (fire board), aluminum composite panels, glass fiberboard, plexiglass, hard plastic,
Rubber blocks. Wood: part of the plastic products before the proposed cohesion sticky. Not suitable for pasting polystyrene, plastic
Ethylene, polyethylene, polypropylene, mirrors and some artificial leather.