Directions for use:
1. For best performance bond surfaces should be clean and
free from grease.
2. This product performs best in thin bond gaps (0.05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup
solvents, nitromethane or acetone.
Loctite Material SpecificationLMS
LMS dated September-01, 1995. Test reports for each batch
are available for the indicated properties. LMS test reports
include selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
KS609 is a thermal conductive grease. It has excellent thermal properties (thermal conductivity 0.75WM / K),
General using for electronic devices.
The product is excellent insulation properties, volatile small and easy to use. Excellent Heat – resistant and cold – resistant .
Wide temperature range, no cure with low temperature -50 ℃ .
Loctite Loctite 2432 is a medium strength thread locking agent. This adhesive has very low halogen and sulfur content and is specifically designed for metals that are sensitive to these contaminants used in the nuclear industry, such as titanium. You can use hand tools to separate parts.
Disassembly of products used to brake and seal threaded joints can be easily accomplished using traditional hand tools.
It is especially suitable for stainless steels that do not use surface activators.
Polymerization occurs when the product is confined between metal surfaces with small gaps in the absence of air.
Its function is to prevent loosening and leakage due to shock and vibration.
The thixotropic properties of LOCTITE 2432 prevent migration or creep after application to surfaces.
Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on a variety of materials.
Low gap fill. Ethyl base monomer. Excellent on rubber/plastic substrates. Fair on metal substrates. Fair on porous substrates. Military Spec MIL-A-46050C Type 2. Military Spec MIL-A-46050C Class 1. A primer is required for hard-to-bond materials such as polyethylene, polypropylene, acetal, PET, nylon, soft PVC, silicone rubber, and glass.
General information about the Aron Alpha® product line: Cyanoacrylates are single component instant adhesives that bond a wide variety of surfaces with a strong, durable bond. They offer ease of application, a wide range of performance parameters, and reliable solvent-free bonding.
One, off-white 3M glue DP420 features are as follows:
● Elastic epoxy resin with medium operating time
● 1 ~ 2 hours to reach the operating intensity
● High performance
Viscosity Approx. 75 ° F (24 ° C) (CPS): 45000
75 ° F (24 ° C) Operating time Approximate value: 20 minutes
T-type peeling (PIW) at 75 ° F (24 ° C): 50
Overlapping shear strength (PSI):
1.180 ° F (82 ° C): 450 ° C
2.250 ° F (121 ° C): 200
Second, the black 3M glue DP420 features are as follows:
● DP-420 gray derivative of gray glue
● strong and durable structure of bonding
Viscosity Approx. 75 ° F (24 ° C) (CPS): 22500
75 ° F (24 ° C) Operating time Approximate value: 15 minutes
Overlapping Shear Strength (PSI):
1. -67 ° F (-55 ° C): 4500
2.75 ° F (24 ° C): 4500
3.180 ° F (82 ° C): 2980
4.250 ° F (121 ° C): 570