-
Henkel LOCTITE SF790 Industrial cleaner Remover Surface treatment gasket remover
Brief introduction: The package size is 18oz canned. Used for gasket, sludge removal, color is white.
790 gasket remover can remove glue, oil, paint, carbon and other surface residual stains. No corrosion to aluminum. However, it should not be used on plastic, linoleum or synthetic fibers.
Loctite offers a range of surface treatment products to ensure the best performance of Loctite adhesives and sealants. Loctite accelerator is used to improve the curing speed and the ability to fill the gap of the quick-drying adhesive. The activator is a curing agent specially designed for structural adhesives; Loctite substrate is used on inactive surfaces to ensure that the adhesive adheres better to the substrate, which allows the adhesive to cure quickly.
-
Henkel LOCTITE UV3523 UV-cured UV adhesive metallic glass sealant for impact resistance
Product Description: Loctite UV3523 has the following product features:
Technique: Acrylic acid chemical type modified acrylate
Appearance (not cured) : Clear, light to dark amber liquid LMS
Composition: One component – no mixing viscosity required
Medium curing method: ultraviolet secondary curing anaerobic curing with activator curing
Advantages: Production – Fast curing
Application: Bonding
-
Henkel LOCTITE UV9060F UV moisture double curing adhesive Acrylic resin High thixotropic
LOCTITE ECCOBOND UV 9060F, acrylic resin, UV/ moisture dual cure system, high thixotropic, fluorescent detection, component encapsulation and chip corner reinforcement
-
Henkel loctiteAA352 UV UV adhesive light curing resistance to impact tough flexible metal glass bonding
Brand: LOCTITE
Model number: AA 352
Specification: 1000ML
Shelf life: 24 months
Component: Single component
Characteristics: Moisture resistance, toughened bonding
Application: Bonding metal, wood, etc -
Henkel LOCTITEEA 9497 Two-component epoxy resin adhesive AB Structural adhesive is peel and impact resistant
Name :LOCTITE
Model number :EA 9497
Specification :50ml
Mixing ratio :2:1
Shelf life :24 months
Type: epoxy resin
Application: bonding metal, plastic, etc -
Henkel LOCTITESF 7200 gel remover 00 Metal gasket cleaner Universal cleaner
Brand: Henkel Loctite
Product name: gasket remover
Specifications: 400ml
Application: Component cleaning
Key parameter: solvent type -
Henkel TECHNOMELT PUR 4663 Milky White Multi purpose Active hot melt adhesive cold and heat resistant multi purpose
- High initial strength
- Chemical cross-linking within few days
- Bond joint turns into a thermoset
- Very high heat resistance and cold flexibility
- Excellent water resistance
- Resistant to most solvents
-
KONISHI FB500B single-component flame retardant glue elastic adhesive for electronic parts
Product name :KONISHIFB500B
Origin: Japan
Specification: 333 ml
Component: Single component
Characteristics: Impact resistance, flame retardant type
Curing method: Curing at room temperature
Application: Suitable for bonding and sealing of electronic and electrical parts. -
LOCTITE 510 cures when confined in the absence of air between close fitting metal surfaces
NSF International Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification. -
LOCTITE 620 Cylindrical adhesive High strength anaerobic adhesive high temperature resistant adhesive for bearing gear
The LOCTITE620 is mainly suitable for bonding cylindrical assembly parts. The product cures in isolation from air between two closely fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical uses include filling tight fitting press fitting, gaps between key grooves and splines; Assembly bearing and bushing, and make the press fit bond holding strength higher. It is especially suitable for the condition that the temperature must reach 200°C.
-
LOCTITE 104 two-component epoxy AB Structural glue thermosetting liquid adhesive
- Product parameters
Typical use: For bonding metals, glass, ceramics and thermosetting plastics in applications requiring extremely high temperature exposure.
Brand name: LOCTITE Ablestik 104
Component: two components
Product Overview:
Henkel Loctite Ablestik 104 is a two-component thermosetting liquid epoxy adhesive for the assembly of thermosetting plastics, metals, ceramics and glass. It has a long service life, high shear strength, non-conductivity, excellent high temperature and chemical resistance
- Product parameters
-
LOCTITE 201 High temperature resistant thread lock Anaerobic adhesive dry skin film precoating
Matters needing attention
This product is not suitable for use in pure oxygen and/or oxygen-rich environment, and can not be used as a sealing material for chlorine gas or other strong oxidizing substances
Use.
Before using a water-based cleaning solution to clean the bonded surface, it is important to check the cleaning solution and the adhesive
Incompatible. In some cases, these cleaning solutions can affect the curing and properties of the glue solution.