-
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure. -
LOCTITE 416 general purpose cyanoacrylate instant adhesive.
LOCTITE 416 is tested to the lot requirements of Military
Specification Mil-A-46050C. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification -
LOCTITE 480 rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.
LOCTITE 480 is a rubber toughened adhesive with
increased flexibility and peel strength along with enhanced
resistance to shock. -
LOCTITE 495 general purpose cyanoacrylate instant adhesive
Loctite 495 is High thermal performance and for rapid bonding of plastics, rubbers and metal. LOCTITE 495 is a general purpose cyanoacrylate instant adhesive.
-
Loctite 515 plane sealant anaerobic flange sealant instead of washer nut plane seal
Application:
Commonly used as in-place washers for pumps, thermostats, compressors, transmissions and safety locks, more suitable for rigid metal flanges, moderate curing speed, thixotropy.
Storage Conditions:
Conditions will be ideal if the product is stored in a cool, dry place in the temperature range of 8-28 ° C (46-82 ° C). To avoid contamination of unused glue, do not pour any glue back into the original package.
-
Loctite 603 cylinder retaining adhesive anaerobic adhesive metal retaining parts high strength thread bearing gear
Brand Name: Henkel Loctite
Product type: General purpose cylindrical adhesive
Product model: Loctite 603
Product specification: 50 ml
Product color: Green
Viscosity: Low viscosity
Strength: High strength
Curing time: 8 minutes for initial setting, 24 hours for full setting
Operating temperature: -55c to +150℃
Suitable material: Suitable for all kinds of metal cylindrical retaining parts
Application scenario: It is suitable for the bonding of cylindrical assembly parts, especially for the metal surfaces that cannot be clean and tightly fitted -
LOCTITE 609 designed for the bonding of cylindrical fitting parts
LOCTITE 609 is tested to the lot requirements of Military
Specification Mil-R-46082B. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification. -
LOCTITE 609 designed for the bonding of cylindrical fitting parts
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph
below shows the shear strength developed with time on steel
pins and collars compared to different materials and tested
according to ISO 10123. -
LOCTITE 638 designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm
LOCTITE 638 is designed for the bonding of cylindrical
fitting parts, particularly where bond gaps can approach 0.25
mm and where maximum strength at room temperature is
requiredThe product cures when confined in the absence of air
between close fitting metal surfaces and prevents loosening
and leakage from shock and vibrationTypical applications
include locking bushings and sleeves into housings and on shaftsL -
LOCTITE 680 cylinder fixed anaerobic adhesive high strength low viscosity inert metal high temperature and oil resistance
LOCTITE 680 providesrobust curing performance. It not only works on active metals
(e.g. mild steel) but also on passive substrates such as
stainless steel and plated surfaces. The product offers high
temperature performance and oil tolerance. It tolerates minor
surface contaminations from various oils, such as cutting,
lubrication, anti-corrosion and protection fluids. -
Loctite 7400 instant dry marking adhesive red instant dry adhesive high strength electronic equipment marking ink electronic marking liquid
Loctite product 7400 is a solvent based dark red marking ink for use on electronic equipment. The product dries quickly and has excellent adhesion to a range of materials. It is ideal for tamperproofing adjustment points or marking components to indicate they have been set or tested. Physical Properties.
-
Loctite 9455 colorless special adhesive epoxy resin adhesive
Loctite 9455 epoxy adhesive is specially developed for a variety of special adhesives. Widely used where tensile, shear and peel strength is required plus resistance to shock, pressure and vibration. When it is in contact with the activator, the material quickly cures into a weather-resistant adhesive layer at room temperature without mixing